Home » News

Electron Beam Ion Source (EBIS)

After several years of successful operation in the Collider Accelerator Department Electron Beam Ion Source (EBIS), the customer decided to upgrade their capabilities by adding a second Cryomagnetics’ magnet system. This time, both 5T magnet systems are required to be operated together with only 20 cm space between them.

By |March 1, 2018|Categories: Beamline, Recent Systems|0 Comments

Proton Therapy: Provision Treats First Patients

ProNova's first SC360 Proton Therapy system is now successfully treating cancer patients!  The cryogen-free superconducting achromats in the system were designed and manufactured by Cryomagnetics. See the following Press Release: Provision Healthcare Introduces a Major Advancement in the Care of [...]

By |February 22, 2018|Categories: News|0 Comments

9.4 Tesla 10ppm C-Mag Superconducting Magnet for ESR/EPR

9.4 Tesla (400MHz) 10ppm Cryogen-FREE Magnet System for Electron Spin Resonance. C-Mag Vari-9.4, 9.4 Tesla (400MHz) Cryogen-FREE superconducting magnet system with integral 200 gauss superconducting modulation coil and 10 gauss resistive modulation coil. System optimized for Electron Spin Resonance (ESR)/Electron Paramagnetic Resonance(EPR) Spectroscopy.

By |January 8, 2018|Categories: C-Mag Magnet Systems, Recent Systems|0 Comments

Magnet Cryostat for High Energy Physics

The SPIRAL2 project at France’s GANIL (Grand Accélérateur National d’Ions Lourds) laboratory will significantly extend the research possibilities of Radioactive Ion Beam (RIB) physics. Part of SPIRAL2 is the S3 (Super Separator Spectrometer), a device designed for experiments with very high intensity stable ion beams. S3 requires seven (7) complex Superconducting Multipole Triplet (SMT) magnet systems. Each system is comprised of three sets of quadrupole, sextupole, octupole and dipole superconducting magnets. GANIL selected the team of Cryomagnetics and Advanced Magnet Lab to design, develop and manufacture the SMT systems. The first system recently passed final factory tests at Cryomagnetics’ facility in Oak Ridge, TN.

By |November 10, 2017|Categories: Beamline, Recent Systems|0 Comments

Model 4G Superconducting Magnet Power Supply Video

Navigate to the following YouTube link for a video overview demonstrating the ease of configuration and operation of the Model 4G Four Quadrant Superconducting Power Supply. The Model 4G represents our “4th Generation” of power supplies optimized for the high [...]

By |February 12, 2016|Categories: News|0 Comments


Go to Top