9 Tesla magnet system with custom high volume, low loss vapor shielded dewar. Microscopy methods typically require very low vibration (low nucleate boiling) and long hold times. The referenced system was designed with a large 150L, low boiloff vapor shielded dewar. The support assembly was designed to accommodate the customers existing sample insert and to be mounted from the top plate to anti-vibration gantry.
9/1/1 Tesla 3-Axis magnet system with 1T spherical vector rotation. Large 4.5 inch bore to accept custom Variable Temperature Insert (VTI). The VTI is provisioned with 24 each twisted OFHC copper and Phosphor Bronze wires. In addition, 3 bulkhead ports fitted with 4 SMA headers each (12 total) 7-39.8db/ft copper and 5-3.96db/stainless steel coaxial cables, and single fiber optic port.
After several years of successful operation in the Collider Accelerator Department Electron Beam Ion Source (EBIS), the customer decided to upgrade their capabilities by adding a second Cryomagnetics’ magnet system. This time, both 5T magnet systems are required to be operated together with only 20 cm space between them.
ProNova's first SC360 Proton Therapy system is now successfully treating [...]
9.4 Tesla (400MHz) 10ppm Cryogen-FREE Magnet System for Electron Spin Resonance. C-Mag Vari-9.4, 9.4 Tesla (400MHz) Cryogen-FREE superconducting magnet system with integral 200 gauss superconducting modulation coil and 10 gauss resistive modulation coil. System optimized for Electron Spin Resonance (ESR)/Electron Paramagnetic Resonance(EPR) Spectroscopy.
The SPIRAL2 project at France’s GANIL (Grand Accélérateur National d’Ions Lourds) laboratory will significantly extend the research possibilities of Radioactive Ion Beam (RIB) physics. Part of SPIRAL2 is the S3 (Super Separator Spectrometer), a device designed for experiments with very high intensity stable ion beams. S3 requires seven (7) complex Superconducting Multipole Triplet (SMT) magnet systems. Each system is comprised of three sets of quadrupole, sextupole, octupole and dipole superconducting magnets. GANIL selected the team of Cryomagnetics and Advanced Magnet Lab to design, develop and manufacture the SMT systems. The first system recently passed final factory tests at Cryomagnetics’ facility in Oak Ridge, TN.
He-3 Variable Temperature Insert (He-3 VTI) has been designed to provide continuous temperature control from 0.30 K to 40 K
C-Mag Vari-14, 14 Tesla Cryogen-FREE superconducting magnet system with 2-Axis motorized sample positioner.
C-Mag Vari-711, 3-Axis 7/1/1 Tesla Cryogen-FREE superconducting magnet system with 1 Tesla spherical vector rotation. Designed to be mounted beneath a commercial optical table.
3-Axis 6/1/1 Tesla Cryogen-FREE superconducting magnet system with 1 Tesla spherical vector rotation. Designed to be mounted on commercial optical table with access to 5 ports (2 X-axis, 2 Y-axis and a single bottom mounted Z-axis).